Whats causing this to happen

Hi, have installed a E3d V6 hot end GT2 16 teeth belts and bearings changed steps in EEprom, but I am having issues when printing, s923.photobucket.com/user/deafol … t=3&page=1, this is printed upside down so the bad print is printed first, gap between hotend and bed is 0.28, can anyone help please

Can’t you print it the way it is layed out in the picture?
Printing “domes” from inside to outside mostly gives no good results, because of the great overhang.

Hi, that was the way it was layed out in the pictures, it is the BeQui jointed robot from thingyverse