Which one will work
0 voters
Hello,
A few years ago i’ve bought a k8200 controller. I never really used it because i broke the rotary encoder the first day i had it.
I don’t want to buy a new controller for this small part, so i would like to fix it. The only problem i have though, is that i don’t
know what rotary controller is used and which ones would work.
I hope someone who knows more about this could help me out !
thanks for your help.
Hy, I had the same problem, Velleman replies me that it was an EC11 rotary encoder (18 positions ? I dont remember)
Check this one
ebay.com/p/5pcs-Rotary-Enco … 1425031956
or this one
ebay.com/itm/3Pcs-6mm-D-Shaf … 2548.l4275
Links are for information, I think someone else can confirm these informations
Good luck
[quote=“Tag”]Hy, I had the same problem, Velleman replies me that it was an EC11 rotary encoder (18 positions ? I dont remember)
Check this one
ebay.com/p/5pcs-Rotary-Enco … 1425031956
or this one
ebay.com/itm/3Pcs-6mm-D-Shaf … 2548.l4275
Links are for information, I think someone else can confirm these informations
Good luck[/quote]
I will contact my local electronics store and ask for the EC11 rotary you mentioned. Thanks for your help, i hope this is the correct one.
If someone else knows more certain, please let me know.
Hy, maybe you should wait for Vellman reply after the week end, they will confirm 