Good morning,
I am trying to read the pulse ouput signal from this instrument but although the led is blinking I am not able to see any pulse on the oscilloscope. Is there any impedance adaptation I must be aware of? Or any This is the second module I have tried so I would discard malfunction on the unit.
Regards, Álvaro
Velleman Projects items only please. See forum rules. For all other items of the Velleman group please use the online support form.
http://www.velleman.eu/support/contact/?product=411264
Hint: the output of such device is an open collector, so you will not see any pulses, unless you apply a voltage trough a series resistor.