Need help for a temperature sensor with the K8055

Kits PC Related Projects
1

Hi!
I’ll try to explain you my problem but my english is poor…
I would like to make a project with:
-K8055
-LM35

I would like to know if must I use a kit (f.e.:8067 kit) or can I connect the LM35 in the A1,A1 and GND Analog Inputs of the 8055?
In the future, I would like to connect a relay to activate a ventilator. Where must I connect it?

Thanks a lot for your answers and once again sorry for my bad english ^^

2

The output voltage of the LM35 is very low. You have to increase the gain of the K8055 input amplifier. There are instructions in the manual how to do this.
Anyhow there may be resolution problems due to the very low output voltage of the LM35.

Vout= +250 mV at +25°C

The K8067 is designed to operate with the K8055.