I have done a lot of modifications on my Printer, such as Cable covering and a Printer case.
If someone can tell me how i add a Picture, i will do so.
Here is my modifikation on the X-Cable
http://postimg.org/image/z1fitg2t1/
Here is my Modifikation on the Printer Table
http://s26.postimg.org/l6h8az8e1/IMG_0908.jpg
Now the Printer case
http://s26.postimg.org/3rx02pb95/IMG_1018.jpg
Hello bernd14,
you have to upload the pictures to postimage.org/ and copy the link for forum
in your post.
Best regards,
DCM
[quote=“DCM”]Hello bernd14,
you have to upload the pictures to postimage.org/ and copy the link for forum
in your post.
Best regards,
DCM[/quote]
Hello DCM,
thank you so much, and have a nice day.
best regards
Bernd
Hi Bernd,
Nice case you build there 
Mind to share what you used to build it?
Jack
BTW if you want to embed your pictures in the post, use the “Img” tag instead of the “URL” one.
The case looks really good.
Could you post a close up of the print table?
The Profiles of the Printer case are from Trendstand and the Profiles alone cost is round about 300 €.
But i have a complete PDF File where i explain all my modifikations but it is in german and i don´t know how i can display it but if someone is interested i can send it per e-mail. it is 14 MB.Or i try it to upload to my Pictures.
Here are Page 1-3 of 14 tomorrow if someone is interested i post the rest.
postimg.org/gallery/19fdn3ee/
Hello Bernd,
i am very interested in the complete PDF-File. Unfortunately i can’t send you a private message in which is my mail-adress.
Greetings from Germany
Hans
Hallo Hans Baer,
meine E-Mail ist : bernd.schwaerzel@t-online.de
wenn du mir eine E-Mail schickst kann ich dir die PDF zusenden.
Grüße
Bernd