Learn RF remote does not work on P8095-4 MP3 Player Kit

Kits General
1

Hello,

I recently bought and assembled the 8095 MP3-Player Kit.
Everything is working fine except the RF remote.
I can’t get it working using the VM160T
I checked with an Osciloscope, that the rx433 Module is receiving and transmitting digital data to the PIC12F629 on the MP3 Board.
When I press the “Learn RF remote” Button - nothing happens.
The LED LD4 remains on - not blinking.
It seems that the 12F629 does not work correctly. Is there a Firmwareupdate available?
I have a PIC-Programmer so I can programm it by myself.

Can someone help me please?
Greets - Helmut

2

Please check also IC1 pin 5 state. Should be +5V when “Learn RF remote” button is not pressed and 0V when this button is pressed.
BTW: One of the VM160T transmitter buttons and the “Learn RF remote” button may have to be pressed continuously for 10 seconds before learned and the LD4 starts to blink.

[quote]It seems that the 12F629 does not work correctly. Is there a Firmwareupdate available?
I have a PIC-Programmer so I can programm it by myself.[/quote]Sorry, for copyright reasons we never supply source or .hex.