Hi,
Can the K8090 be used to control sprinkler valves (24vDC, .3amp). If so, would I run the board from the USB power and put the 24 vdc power on the output block?
Thanks
Shuld work fine.
Please note the USB is limited to 5m between PC and board.
Hi,
Can the K8090 be used to control sprinkler valves (24vDC, .3amp). If so, would I run the board from the USB power and put the 24 vdc power on the output block?
Thanks
Shuld work fine.
Please note the USB is limited to 5m between PC and board.