K8060 135mV across R19?

Kits Audio Hi Fi Projects
1

Hi,

I finished putting my kit together and wired everything up with a slow blow 1A fuse. When powering on there is no hum from the transformer and the led on the board (led1) lights up and stays on.

However, I get 135mV (0.135V) across R19.

The potentiometer is fully counter-clockwise (anti-clockwise).

All traces read clean from component to component on the board.

Nothing has blown/burnt/gotten hot.

However the output to a 6 Ohm speaker makes an awful squealing noise.

The power transformer gives out 33.16 VAC to the board.

Any ideas?

Thanks in advance!

Mike

2

Doh!

Same solution as Mr. Sparks.
viewtopic.php?f=2&t=2003&hilit=k8060

My T5 and T6 were reversed.

Remove and replace and it works great now. :slight_smile:

Thanks anyway!

Mike