K8048 and PIC16F876A support

Hello,

I have been using a K8048 for a while and now have some PIC16F876As to program. The load fails verify at seemingly random addresses. I notice a few other posts on this subject but I cannot see a solution or fix from Velleman. The device is listed as supported and I’m using ProgPIC2 v2.6.0.

Any advice appreciated.

Thanks

Anyone?..hello…anyone…is it on…1…2…1…2 :shock:

Admin: Please do not post answers like these, this is a forum, not kindergarten

I do not know where your from but there’s a link to a other forum and there is a complete troubleshooting guide only it is in dutch.

maby you find it handy to read
link

[quote=“timmie”]I do not know where your from but there’s a link to a other forum and there is a complete troubleshooting guide only it is in dutch.

maby you find it handy to read
link[/quote]Hi Timmie, that guide looks like it could be quite helpful, but unfortunately babel fish translation only tanslates word for word, it does not take into account any phrases, so the resultant english text is far from comprehensible and makes virtually no sense whatsoever.

I will try too translate it to english so it is easier too read