Hi
I can’t find the k8019_setup file at the link indicated in the manual:
velleman.eu/downloads/files/ … _setup.zip
Can you show me where I can find it.
thank you.
Message :
Not Found
The requested URL /downloads/files/downloads/K8019_setup.zip was not found on this server.
Apache/2.2.22 (Ubuntu) Server at www.velleman.eu Port 80
All downloads for the K8019 can be found on the Velleman website
velleman.eu/support/downloads/?code=K8019
Can anyone show me how to connect an electronic door strike to the K8019. The strike has a positive and negative and requires power to stay locked. I want the proximity reader to allow the lock to open when a card is used. There is “NO” “Common” and “NC” connections but is there a diagram available?.
Hi @bravesirtim,
For your doorstrike you need to use the NC and COM contacts.
So in normal condition (no card detected), the NC contact is closed => doorstrike is powered (locked).
When card is detected, the NC contact opens, and doorstrike is unpowered (unlocked).
Circuit is as follow:
Hope this will help you further.
Best Regards,
Onlydreamer
