Issue with print, doesn't dry quickly enough?

Vertex 3D Printer Vertex - Issues while printing
1

Hi all
I wanted to print this: https://www.thingiverse.com/thing:2580690

But some issues appeared during printing… sometimes a small ‘wire’ hangs out of the nozzle while it’s moving and not printing, causing wires hanging between the model.

Another issue can be seen in this picture: https://i.imgur.com/UtHVvQ4.png
How can I fix this?

2

The problem you are seeing is that you asking the printer to print in air.
It can’t do that.
You will need to turn on (enable) support in the slicer.

3

OK that sounds logic, didn’t knew about that function