Issue maybe with y axis - hangs while printing

K8200 3D Printer K8200 - Issues while printing
1

Hi

I bought a vertex k8400 3d printer.
When I print a job there is also this problem (like printscreens) at the end of any printjob.

I think, that the y-axis hangs when the printer is printing

http://prntscr.com/79qfsz
http://prntscr.com/79qg71
http://prntscr.com/79qgii
http://prntscr.com/79qgr9

What can I do to solve this issue? Does anyone know this issue?

Thanks a lot
nitro89

2

Hi - you have posted in the K8200 section of the forum.
But looking at the 4th photo Y axis belt it looks like it might have been slipping on the pulleys. As I don’t have that modle of printer I can’t offer sepcific advice, but you may want to look over the manual again with regards to any referance to tensioning the Y axis.

3

Go check the topics over layer shifting in the Vertex part of the forum (and post there when you want to). It’s a mechanical problem : your axis aren’t running freely enough. Have a look at the [color=#408040]Wiki[/color].