Increase sampling frequency in transient recorder mode


Is it possible to increase the maximum sampling frequency 20 ms in the transient recorder mode in the PCLab2000LT software ?

For instance, I need to record data with a best sampling frequency like 2 ms.

I guess it is just a software limitation because the sampling frequency in oscilloscope mode is higher than 20 ms.

Maybe it could be a futur improvement of the software ?

Thanks in advance.

Best regards,


The transient recorder timing is controlled by the PC timer.
Sorry to say, but this 20ms is the lowest “safe” time interval to do all the tasks needed (e.g. USB communication, display update etc.).

Thank you for your reply.