I need a new motherboard.
Where can I order it?
If you don’t mind me asking why do you need a new one?
That would be interested too . ; )
I do not know exactly , definitely I need a new one.
Or I can take another without problems ? e.g. Rumba e.t.c.
Do you mean that yours is out of order? Are you positive about it? Unless you fried it, another problem could perhaps be solved if you explain us what happened …
I fried it . How? I do not know, the z axis driver is fully burned .
If the rest of the main board is still functioning you can just change the stepper driver (try swapping the Z driver with another).
To display an image, you have to upload it on a picture hosting site and copy the link in the URL tag.
To display an image, you have to upload it on a picture hosting site and copy the link in the URL tag.[/quote]
It does not matter because the picture,
can someone tell me where you can order a new one?
You can send a mail to “support at velleman dot com” explaining your issue. They’ll ask you to send your board for inspection/repair.
This is a site I bought my printer from and they have a whole new board and the individual motor drivers as well.
You should send an email to techsupport[color=#BF0000]at[/color]vellemanusa[color=#BF0000]dot[/color]com
Be sure to include if you have the K8200 or the K8400
The part number of the replacement board is VK8200/SP
This comes with the driver cards.
If you just need an individual driver card the part number is A4988/SP
[quote=“Wrong Way”]The part number of the replacement board is VK8200/SP
This comes with the driver cards.
If you just need an individual driver card the part number is A4988/SP[/quote]
This are the part numbers for a K8200.
For the Vertex it’s : K8400-MB’TW for the main board and K8400-DB’TW for the driver board.
[quote=“raby”][quote=“Wrong Way”]The part number of the replacement board is VK8200/SP
This comes with the driver cards.
If you just need an individual driver card the part number is A4988/SP[/quote]
This are the part numbers for a K8200.
For the Vertex it’s : K8400-MB’TW for the main board and K8400-DB’TW for the driver board.[/quote]
Thx, @ all!!!
Raby,
If you go to the site that Moeli83 posted you will see they only list the K8200.
It seems this was posted in the wrong category.
It should be in the K8200 section
My Stepper Driver burned too, yesterday -.-
Is this the right one for the Vertex K8400 ?
http://www.vetco.net/catalog/product_info.php?products_id=16771&keywords=stepper%20motor%20driver
[quote=“MorvlingDE”]Is this the right one for the Vertex K8400 ?
vetco.net/catalog/product_in … r%20driver[/quote]Yes it is.