I ran the self calibration on my new HPS140. It came up with PASS, however, the following displays using the up down keys give these results:
1-Pos2 ADJUST CV2 FAIL
2-Pos2 ADJUST CV1 FAIL
3-Pos2 CHK AC/DC FAIL
4-Pos2 CHECK GND PASS
5-Pos5 ADJUST RV2 >>
6-Pos5 ADJUST RV1 >>
7-Pos5 CHK .2V/div FAIL
8-Pos5 CHK .5V/div FAIL
9-Pos4 CHK 1V/Vdiv FAIL
10-Pos4 CHK 2V/ FAIL
11-Pos3 Probe x10 FAIL
12-Pos2 ADJ. CV3 FAIL
13-Calibration END
Are they anything to worry about? It is working correctly?