I have 32 heatbeds left if someone would like to get one. Check the first post in the thread.
// Marlark
How fast do you reach 100 or 110 degrees C?
@ Malark
Hello,
I wonder sometimes if you have any custom heat beds still in stock?
Since Iām interested to buy one. If it still can, what are the paypal data (how can i buy this with paypal).
Best regards,
Xavier Claeys
Technical Engineer
Velleman nv | Legen Heirweg 33 | 9890 Gavere | Belgium (Europe)
Hey everyone,
Someone else has trouble too with slow heating from the heated bed?
I tried already 3 different power supplies 12V (15A, 25A, 30A).
Used it via an power-expander: reprap.me/power-expander.html
I also tried direct to power supply, same result.
The first 50Ā°C degrees go Ā± fast, from 50Ā°C to 68Ā°C speed is ok, above 68Ā°C its really slow.
After 35 min still only 70Ā°C.
Any suggestions someone? Different cable? Broken heated bed? ā¦?
What time does it take in your case to warm up to 100Ā°C?
Kind regards
Nico
How fast do you reach 100 or 110 degrees C?[/quote]
I counted the time yesterday for the heatbed reaching 100 Ā°C from room temperature (20 Ā°C) which took almost exactly 5 Minutes.
for me thats more then quick enough to be honest.
Maybe youre wiring is faulty ? even with the power expander it was somewhere equaly fast with my printer heating up.
Wow nico that is slow. What Watt size is the psu your using for the heatbed?
// Marlark
Im down to 25 heatbeds left now 
Are they still available?
I would like to know how to get one.
Kas.
Lol,
Maybe by reading Marlark his opening post 
How many bed are still available ?
Does anyone have any news from Marlark?
Seems he hasnāt been to the forum, lately. Maybe send an email to his address, noted in the post above here?
I received a first mail from him. I made the paypal transfer then i returned several emails to him but no more answer from him ā¦
[quote=āMarlarkā]Wow nico that is slow. What Watt size is the psu your using for the heatbed?
// Marlark[/quote]
The problem is solved 
No problem with my extra PSU but a bad soldering. Resolderd everything and problem is fixed 
Marlark ?
Maybe you did it already, but otherwise best send a new email with all confirmations enabled (delivery & read) - see what that gives. Normally, Marlark is fairly quick to respondā¦
Responded and solving it asap Dont understand hos i managed to miss the payment. 
Are they still available?
Yes i have a couple left.
Just got mine in the mailbox, quick delivery and everything looks very good. Just as promised, thanks!