It is great that the schematic is published - however I miss the BoM (Bill Of Materials). That would help a lot of people
and as Open Source this would not be an issue I guess.
Thanks in advance
Regards Eero
It is great that the schematic is published - however I miss the BoM (Bill Of Materials). That would help a lot of people
and as Open Source this would not be an issue I guess.
Thanks in advance
Regards Eero
AFAIK the Vertex uses one of the controllers listed in the RepRap Wiki.
I don’t know exactly which type, but you should find it there.
There should also be a BoM or at least a link to it (or to the manufacurer’s site), asides schematcis and description.
cheers,
Christian
Thanks Christian, tried to find it in the RepRap Wiki without any success.
I would appreciate if Velleman published it in the documentation page where the schematic is.
Thanks in advance
Regards Eero
Can you quick post a link to the PCB picture?
Then i’ll have a look.
cheers,
Christian
Thanks Christian - here is the link to build instruction (pic of mainboard)
http://manuals.velleman.eu/article/12-mounting-the-mainboard-12.html
Sorry, i can’t find it too.
Perhaps Velleman can name the Manufacturer?
Thanks for the try - appreciated.
Let’s wait for Velleman support then.
Regards Eero
We’re working on a way to make the Vertex files available.
We’ll let the community know once ready.
Hi Velleman
Why not make them available where schematic’s are issued, http://manuals.velleman.eu/article/3-schematics-223.html
Note - The schematics is not complete either, for example all connectors (2 row connectors) pin-out is missing - this would also be preferable for many to be published.
Thanks in advance
Regards Eero
Greetings Velleman support
We are still interested in correct schematics and files associated to the electronics.
If been available then we would be more than happy to publish on the Wiki.
Any news on this?
Regards Eero
Sorry, at this time we’re too busy with more urgent and important issues (improving support follow up system).