0v across r19 k8060

Hello.
I have just completed the k8060 amp kit and powerd it up, everything seems fine, but i cant set the bias across r19.
Nothing happens when i turn vr1. why?
Everyrhins seems to be in order,nothing is burnt, smoking or getting hot.
The fuse is alright and i get + & - 45V on the rectifier diods (to much?) and 8.99v on the “9V-diod”.
Don’t know if matters but ive mesured 0.02V over r20.

What can be wrong?

Problem solved. :slight_smile: two solder points on the back of the pcb had a tiny bit contact. seperated them
then bias could be set without problem. :slight_smile: