Strobing with K8064 and K8036 kits

Kits Microcontroller Programmer - Experimenting Project
1

I have assembled both these kits and although they appear to work both exhibit the same anomaly in that the lamp strobes at between 2 and 3 hertz at all settings except full on. The test lamp being used is a 35W GU10. How can this fault be corrected ?

In their current state they cannot be used for controlling stage lighting.

Regards John W Bibby

2

Try first to use your K8064 with an incandescent lamp from min 60W, Using a single 35W has maybe to low power to trigger the circuit correctly.